CEA Convex Vision 4 000
MULTIFUNCTION INVERTER POWER SOURCES FOR MIG-MAG, MMA AND TIG WELDING
Attractive, highly modern design chassis incorporating latest inverter technology and welding process fully digitally controlled are main features of CONVEX Vision series. Innovative, technologically ahead, robust and easy-to-use, they offer premium quality welding in MIG-MAG, MMA and TIG by “lift” mode and represent the best solution for the most qualified welding applications in any industrial field requiring high precision and repeatability of the achieved results. The CONVEX Vision synergic digital control with its innovative color display allows even less expert welders to very easily adjust in a user friendly way all the welding parameters. After choosing the program type according to used material, wire diameter and gas, the control automatically selects the best welding parameters fruit of CEA’s know-how acquired in over 60 years’ experience. At the same time, CONVEX Vision’s offer also most expert welders the possibility of fine tuning and customizing the welding process control, thanks to the ability to access clear, simple and complete under menus for the best possible configuration and optimisation of the equipment.
Technical Data
Single phase input 50/60 Hz V: n/a
Three phase input 50/60 Hz V: 400
Input Power @ I2 Max kVA: 18.6
Delayed Fuse (l2 @ 60%) A: 25
Power Factor / cos φ: 0.90-0.99
Efficiency Degree: 0.88
Open circuit voltage V: 70
Current range A: 10-400
Duty cycle at (40°C) A100%: 310
Duty cycle at (40°C) A 60%: 370
Duty cycle at (40°C) A 50%: 400
Wires: 0.6 - 1.6
Protection Class IP: 23s
Dimensions: L: 660 mm W:290 mm H: 515mm
Weight kg: 39
Features
Multifunction equipment with premium welding quality in MIG/MAG, MMA and TIG by “lift” mode
Synergic digital control of all the welding parameters
User friendly and easy-to-use selection and recalling of the parameters and welding programs
Personalized parameters: ability to store personalized welding parameters (JOBS)
Excellent arc striking always precise and efficient
Total or partial equipment access locking key by password
Low Power Consumption results in daily operational cost savings
"ENERGY SAVING” function to operate the power source cooling fan and torch water cooling only when necessary
Long interconnecting cable: possibility of using up to 50 m length, parameters can be adjusted from the feeder.
Use of up/down MIG torches enables the remote adjustment of the welding parameters from the torch
Robot interface facility on request
Control rack protection cover